User Manual: Setting Up the eGate Watchdog Camera
Introduction
This guide explains how to set up and integrate the eGate Watchdog camera with the Smart Life app. It covers the initial pairing process and provides two integration types: linking the camera for real-time monitoring of the auto-gate and connecting the camera for full auto-gate control.
Step 1: Pairing Mode – Setting Up the eGate Watchdog Camera
Preparation
1. Power Supply Setup:
- Connect the eGate Watchdog camera to a power source using the provided power adapter.
2. Download the Smart Life App:
- Go to the App Store (iOS) or Google Play Store (Android).
- Download and install the Smart Life app on your smartphone.
Pairing the Camera
- Add the Camera to the Smart Life App:
- Open the Smart Life app and tap “Add Device” in the top right corner.
- Search for “Camera” and select “Smart Camera (Wi-Fi)” from the device list.
- Connect to Wi-Fi:
- Make sure your phone is connected to a 2.4 GHz Wi-Fi network (the camera does not support 5 GHz).
- Enter the Wi-Fi password in the app.
- Scan the QR Code:
- Hold the camera up to your phone so the camera lens can scan the QR code displayed on your phone’s screen.
- Once you hear a voice prompt, tap “I heard a prompt” in the app.
- Complete the Pairing Process:
- Wait for the pairing to complete. The app will notify you when the camera is successfully connected to the Smart Life app.
- Tap “Done” to finalize the setup.
Step 2: Integration Types
Integration Type 1: Real-Time Monitoring of the Auto-Gate
- Link the CCTV to the eGate Controller Pro 2:
- Open the Smart Life app and navigate to the eGate Controller Pro 2 settings.
- Tap the eGate Watchdog icon to link the camera to the auto-gate system.
- Select the Camera for Monitoring:
- Choose the camera you want to use for real-time monitoring.
- The camera will now show a live preview of the auto-gate area, allowing you to monitor the gate’s status.
- Monitor the Auto-Gate:
- View the live camera feed through the Smart Life app to check the auto-gate’s current position (open or closed).
- This integration type is suitable for users who need to observe the gate remotely for security or convenience.
Integration Type 2: Configure the Camera and Add Autogate Device
- Open the camera interface in the Smart Life app.
- Tap the bottom right menu and scroll down to find the “Edit” button.
- Search for the “Autogate Device” in the list of available devices.
- Tap “Add” from the top right corner to link the autogate device with your camera.
- Press “Done” to complete the addition.
- Tap “Finish” to save the configuration.
Troubleshooting
- If the camera fails to connect, press and hold the reset button on the camera for 10 seconds until you hear a prompt indicating the reset is complete.
- Make sure your phone is connected to the same Wi-Fi network during setup.
Now, you have successfully linked the autogate device with your camera, allowing you to directly control the gate through the camera.
Additional Tips:
- Ensure the camera is placed within range of your Wi-Fi network for a stable connection.
- If the pairing process fails, reset the camera and try again.
Your Eden Robot eGate WatchDog CCTV is now set up and ready for use with the Smart Life app, providing you with a smart and secure monitoring solution.